Toro GrandStand 74534 - RH Motion Control Lever Replacement; RH Motion Control Lever Removal

CONTROLS
4-4 36” & 40” Toro GrandStand Service Manual
4
RH Motion Control Lever
Replacement
RH Motion Control Lever Removal
1. Removetheshoulderboltandangenutsecuring
the end of the control cable to the RH motion control
lever(Fig.195).
Fig. 195 DSCN-3610a
2. UnplugthewireharnessfromtheOPCswitch(Fig.
196).
Fig. 196 DSCN-3612a