Toro GrandStand 74534 - Throttle Cable Installation

CONTROLS
4-30 36” & 40” Toro GrandStand Service Manual
4
Throttle Cable Installation
1. Hookthe“Z”bendofthespeedcontrolcabletothe
speedcontrolleverassemblyandsecurewiththe
cableclip(Fig.290).
3. Applythread-lockingmaterialtothethreadsofthe
handleknob(Fig.292).
Fig. 290 DSCN-3552a
2. Securetheleverassemblytothecontroltowerusing
twocarriageboltsandnuts(Fig.291).
Fig. 291 DSCN-3541a
Fig. 292 DSCN-3554a
4. Installthehandleknobtothethrottlelever(Fig.293).
Fig. 293 DSCN-3536a