Toro GrandStand 74534 - Page 96

CONTROLS
4-2936” & 40” Toro GrandStand Service Manual
4
7. Removethecableclipandthenthe“Z”bendofthe
cablefromthethrottlecontrolleverassembly(Fig.
289).
3. Removethecabletiesecuringthechokeandthrottle
cabletotheoildrain(Fig.286).
6. Removethetwocarriageboltsandnutssecuring
thethrottleleverassemblytothecontrolpanel(Fig.
288).
Fig. 286 DSCN-3511a
4. Fromtherearofthemachine,pullthecable
rearward from the frame.
5. Removethethrottleknobfromthethrottlelever(Fig.
287).
Fig. 287 DSCN-3536a
Fig. 288 DSCN-3541a
Fig. 289 DSCN-3545a