MOWER DECK
7-136” & 40” Toro GrandStand Service Manual
7
36” Mower Deck Belt Replacement
36” Mower Deck Belt Removal
36” Mower Deck Belt Installation
5. Remove the belt from the deck and clutch pulleys.
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1” (25mm) HOC.
3. Remove the belt covers.
4. Remove the extension spring from the anchor post
(Fig. 544).
1. Route the belt around the deck and clutch pulleys
(Fig. 545).
Fig. 544 DSCN-3449a
Fig. 545 g.119-0186
2. Install the extension spring to the idler bracket and
spring anchor (Fig. 546).
Fig. 546 DSCN-3449a
3. Install the belt covers.
To Next Page
Loading...
