Toro GrandStand 74534 - Hour Meter;Control Module; Hour Meter;Control Module Removal

ELECTRICAL
8-42 36” & 40” Toro GrandStand Service Manual
8
Hour Meter/Control Module
1. Remove the wire harness from the back of the hour
meter (Fig. 857).
Fig. 857 DSCN-2328a
2. Depress the two tabs securing the hour meter to the
control panel (Fig. 858).
Fig. 858 DSCN-2330a
3. Remove the hour meter out through the front of the
control panel (Fig. 859).
Fig. 859 DSCN-2333a
Hour Meter/Control Module Removal