Toro GrandStand 74534 - 40 Mower Deck LH Spindle Belt Removal

MOWER DECK
7-336” & 40” Toro GrandStand Service Manual
7
40” Mower Deck LH Spindle Belt Removal
1. Turn the ignition off and remove the key.
2. Move the mower deck to the 1” (25mm) HOC.
3. Remove the belt covers.
4. Remove the RH extension spring from the anchor
post (Fig. 551).
6. Remove the LH extension spring from the anchor
post (Fig. 553).
Fig. 551 DSCN-3117a
5. Remove the RH belt from the deck pulleys (Fig.
552).
Fig. 552 DSCN-3119a
Fig. 553 DSCN-3121a
7. Remove the LH belt from around the deck and clutch
pulleys (Fig. 554).
Fig. 554 DSCN-3124a