Toro GrandStand 74534 - HOC Handle Assembly Installation

CONTROLS
4-2136” & 40” Toro GrandStand Service Manual
4
HOC Handle Assembly Installation
1. SecuretheHOClatchtotheHOChandleusingthe
shoulderbolt,washer,andnut(Fig.256).
3. Position the latch rod assembly into the HOC handle
(Fig.258).
Fig. 256 DSCN-3877a
2. Positionthespringandwasherontothelatchrod
(Fig.257).
Fig. 257 DSCN-3880a
Fig. 258 DSCN-3857a
4. Secure the lower end of the latch rod assembly to
theHOClatchusingtheshoulderboltandnut(Fig.
259).
Fig. 259 DSCN-3886a