Toro GrandStand 74534 - 5 Engine; Engine Replacement; Engine Removal

ENGINE
5-136” & 40” Toro GrandStand Service Manual
5
Engine Replacement
Engine Removal
6. Remove the bolt, washer, and nut securing the red
positive cable to the battery terminal, then remove
the battery (Fig. 343).
1. Turn the engine off and remove the key from the
ignition.
2. Turn the fuel shutoff valve to the “OFF” position (Fig.
340).
5. Remove the bolt, washer, and nut securing the black
ground cable to the battery terminal (Fig. 342).
Fig. 340 DSCN-2516a
3. Drain the engine oil.
4. Remove the two sets of wingnuts and hold down
bolts securing the battery cover, then remove the
cover (Fig. 341).
Fig. 341 DSCN-2263a
Fig. 342 DSCN-2265a
Fig. 343 DSCN-2270a