Toro GrandStand 74534 - Page 98

CONTROLS
4-3136” & 40” Toro GrandStand Service Manual
4
5. Route the throttle cable downward between the
controlcablesandfueltank,thenforwardunderthe
fueltankshelf.Feedthethrottlecablethroughthe
”R”clamplocatedonthecarrierframe(Fig.294).
7. Positionthethrottlecabletotheenginethrottleplate
andlooselyinstallthescrewandcableclamp(Fig.
296).
Fig. 294 DSCN-3556a
6. Installthethrottlecable“Z”bendintotheengine
throttlelever(Fig.295).
Fig. 295 DSCN-3535a
Fig. 296 DSCN-3505a
8. Movethethrottlelevertothe“FAST”position(Fig.
297).
Fig. 297 DSCN-3536a