Toro GrandStand 74534 - Page 186

MOWER DECK
7-1736” & 40” Toro GrandStand Service Manual
7
3. Secure the idler pulley to the idler arm using the
carriagebolt,washer,andangenut(Fig.601).
4. Install the spacer into the idler arm assembly (Fig.
603).
Fig. 601 DSCN-3480a
Note: The taller side of the idler pulley hub faces the
idler arm (Fig. 602).
Fig. 602 DSCN-3239a
Fig. 603 DSCN-3482a
5. Positionthebolt,upperandlowerwashers,ontothe
idler arm assembly (Fig. 604).
Fig. 604 DSCN-3487a