Toro GrandStand 74534 - Page 114

ENGINE
5-336” & 40” Toro GrandStand Service Manual
5
11. Unplug the white wire from the black magneto wire
(Fig. 348).
13. Remove nut and lock washer securing the starter
wire to the solenoid (Fig. 350).
Fig. 348 DSCN-2527a
12. Remove the bolt and washer securing the ground
wires to the engine block (Fig. 349).
Fig. 349 DSCN-2530a
Fig. 350 DSCN-2533a
14. Unplug the clutch wires from the wiring harness (Fig.
351).
Fig. 351 DSCN-2536a