Toro GrandStand 74534 - Page 136

HYDRAULIC DRIVE SYSTEM
6-336” & 40” Toro GrandStand Service Manual
6
3. 36” Deck: Route the deck belt around the deck
spindlepulleys.Refertodecal119-0186(Fig.428).
5. 40”Deck: Route the deck belts around the deck
spindlepulleys.Refertodecal119-0187(Fig.430).
Fig. 428 decal119-0186
4. 36” Deck: Install the extension spring to the idler
bracket and spring anchor (Fig. 429).
Fig. 429 DSCN-2666a
Fig. 430 decal119-0187
6. 40” Deck: Install the extension spring to the LH
idler bracket and spring anchor (Fig. 431).
Fig. 431 DSCN-2670a