Toro GrandStand 74534 - Page 155

HYDRAULIC DRIVE SYSTEM
6-22 36” & 40” Toro GrandStand Service Manual
6
5. Install the woodruff key into the wheel motor shaft
keyway (Fig. 500).
7. Secure the wheel hub onto the wheel motor shaft
using the wheel motor nut (Fig. 502).
Note: The wheel motor nut will be torqued in a later
step.
Fig. 500 DSCN-2827a
6. Apply thread-locking material to the threads of the
wheel motor nut (Fig. 501).
Fig. 501 DSCN-2871a
Fig. 502 DSCN-2806a
8. Securethetiretothewheelmotorhubusingthefour
wheel lug nuts (Fig. 503).
Note: The four wheel lug nuts will be torqued in a
later step.
Fig. 503 DSCN-2805a