HYDRAULIC DRIVE SYSTEM
6-24 36” & 40” Toro GrandStand Service Manual
6
2. Position a drain pan under the reservoir tank. Re-
movethelowpressurereturnhosefromthetting
anddraintheuidintothepan(Fig.507).
4. Remove the two sets of bolts, washers and nuts
securing the reservoir tank to the tank bracket, then
remove the reservoir tank (Fig. 509).
Fig. 507 DSCN-2887a
3. Remove the low pressure suction hose from the
reservoirtting(Fig.508).
Fig. 508 DSCN-2887a
Fig. 509 DSCN-2890a
5. Loosenthejamnutsecuringthereturnhosetting,
thenremovethetting(Fig.510).
Fig. 510 DSCN-2898a