Toro GrandStand 74534 - Page 198

MOWER DECK
7-2936” & 40” Toro GrandStand Service Manual
7
4. 40” Deck Only:SecuretheRHsideofthebafe
usingthethreadformingscrew,thentightentheLH
carriage bolt and nut (Fig. 647).
3. 40” Deck Only: Loosely install the carriage bolt and
nutthatsecuretheLHsideofthebafe(Fig.646).
5. 40” Deck Only: Secure the thread forming screw
usingthenut(Fig.648).
Fig. 646 DSCN-3288a
Fig. 647 DSCN-3296a
Fig. 648 DSCN-3292a