Toro GrandStand 74534 - Page 212

MOWER DECK
7-4336” & 40” Toro GrandStand Service Manual
7
6. PlacetheHOC(HeightofCut)intothetransport
position.
7. Usingastrap,securetherearoftheenginebase
(Fig. 695) to the cable retainer (Fig. 696).
8. Usingastrap,securethefrontoftheenginebaseto
the carrier frame (Fig. 697).
Fig. 695 DSCN-3388a
Fig. 696 DSCN-3392a
Fig. 697 DSCN-3399a
9. Removethetwosetsofcarriageboltsandange
nuts securing the engine base to the rear of the deck
(Fig.698).
Fig. 698 DSCN-3405a