Toro GrandStand 74534 - Page 215

MOWER DECK
7-46 36” & 40” Toro GrandStand Service Manual
7
4. Raise the HOC handle to the transport position.
Guide the engine base onto the screws protruding
through the deck (Fig. 706).
5. Looselyinstalltheangenutsontothetwoscrews
(Fig.708).
Fig. 706 DSCN-3430a
Note: The rear deck mounts must be to the inside of
the engine base mounts (Fig. 707).
Fig. 707 DSCN-3437a
Fig. 708 DSCN-3442a
6. Loosely install the two sets of carriage bolts through
the deck and engine base (Fig. 709).
Fig. 709 DSCN-3440a