Toro GrandStand 74534 - Page 245

ELECTRICAL
8-24 36” & 40” Toro GrandStand Service Manual
8
Note: Ensure the PTO stop bracket is nested in the
slot on the clutch plate (Fig. 792).
Fig. 792 DSCN-2645a
9. Feed the clutch wire harness up through the engine
base (Fig. 793).
Fig. 793 DSCN-2647a
10. Install the rubber grommet into the engine base (Fig.
794).
Fig. 794 DSCN-2649a
8. Secure the PTO stop bracket to the engine base
using a bolt and nut (Fig. 791).
Fig. 791 DSCN-2642a