CHASSIS
3-18 36” & 40” Toro GrandStand Service Manual
3
17. Secure the shield and lower hinge bracket to the
operator cushion using two screws and washers
(Fig. 071).
14. Repeat steps 11 through 13 on the other side of the
machine.
15. Install the tires.
16. Secure the shield, foot mat bracket, and foot mat to
the platform using two thread forming screws (Fig.
070).
Fig. 068 DSCN-3984a
13. Secure the platform assembly to the frame using the
bolt,washer,spacer,andangenut(Fig.069).
Fig. 069 DSCN-3974a
Fig. 070 DSCN-0490a
Fig. 071 DSCN-0564a
12. Position the large washer between the platform pivot
and frame (Fig. 068).
To Next Page
Loading...
