Toro GrandStand 74534 - Page 39

CHASSIS
3-20 36” & 40” Toro GrandStand Service Manual
3
24. Repeat steps 19 through 23 on the other side of the
machine.
25. Secure the brake assembly to the frame using four
setsofboltsandangenuts(Fig.078).
Fig. 076 DSCN-0576a
23. Secure the assembly with a nut and washer (Fig.
077).
Fig. 077 DSCN-0577a
Fig. 078 DSCN-3965a
26. Secure the brake link rod to the brake assembly
using the hairpin cotter and clevis pin (Fig. 079).
Fig. 079 DSCN-3962a
22. Position the spacer over the carriage bolt and into
the friction washer and lower hinge bracket (Fig.
076).