Toro GrandStand 74534 - Controls System Maintenance; Motion Control Handle Position Adjustment

CHASSIS
3-2536” & 40” Toro GrandStand Service Manual
3
20. Unplug the pink wire from the green fuel solenoid
wire (Fig. 096).
22. Remove the bolt and washer securing the ground
wires to the engine block (Fig. 098).
Fig. 096 DSCN-4015a
21. Unplug the white wire from the black magneto wire
(Fig. 097).
Fig. 097 DSCN-4017a
Fig. 098 DSCN-4026a
23. Remove the green and blue bullet connectors from
the two small studs on the solenoid (Fig. 099).
Fig. 099 DSCN-4028a