Toro GrandStand 74534 - Page 59

CHASSIS
3-40 36” & 40” Toro GrandStand Service Manual
3
33. Hook the “Z” bend of the choke cable into the choke
control lever and loosely clamp the outer housing of
the choke cable with the cable clamp (Fig. 156).
Fig. 154 DSCN-2674a
32. With the engine throttle control lever in the “Fast”
position, pull the slack from the cable jacket and
tighten the throttle cable clamp (Fig. 155).
Fig. 155 IMG-0576a
Fig. 156 DSCN-2676a
34. Push the choke knob in so it is in the “Open” position
(Fig. 157).
Fig. 157 DSCN-2677a
31. Move the throttle lever to the “Fast” position (Fig.
154).