Toro GrandStand 74534 - Page 62

CHASSIS
3-4336” & 40” Toro GrandStand Service Manual
3
44. Secure the battery cable and red wire eyelet to the
solenoid using a lock washer and nut. Torque the nut
to 35 in-lbs. (4 Nm) (Fig. 166).
Fig. 166 DSCN-4030a
45. Connect the green and blue bullet connectors to the
two small studs on the solenoid (Fig. 167).
46. Connect the white wire to the black magneto wire
(Fig. 168).
Fig. 167 DSCN-4028a
Fig. 168 DSCN-2691a
47. Connect the pink wire to the green fuel solenoid wire
(Fig. 169).
Fig. 169 DSCN-2692a