Toshiba B-EX6 Series - Page 24

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.1 DISC CUTTER (B-EX206-QM-R)
4- 7
3. Push the hook through the rectangle hole with a tool with a fine tip to remove the Platen Holder Cover.
4. Remove the Strip Plate.
5. Restore the Platen Holder Cover.
NOTE: The strip plate is not used. Keep it safe for future use.
Platen Holder Cover Hook
Push
Rectangle Hole
Strip Plate
Platen Holder Cover