Toshiba B-EX6 Series - Page 61

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
(Revision Date: Mar. 1, 2017)
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
4-44
8. Connect the RFID Module to J1 on the Main PC Board with the Interface Cable.
4.8.3 Attaching the Paper Guide
RFID paper guide is not required when using the RFID module with the cutter/peel-off option.
1. Turn the Head Lever to FREE position and gently put down to the side the Print Head Block Holder Plate.
2. Open the Print Head Block.
Print Head Block Holder
Plate
Head
Lever
Print Head Block
J1 Connecto
r
Main PC Board