4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
(Revision Date: Mar. 1, 2017)
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
4-47
7. Place a test tag (RFID tag) on the area indicated in the following photo, and perform a read test.
Select [TEST] and press the [ENTER] key.
Select [ID READ] and press the [ENTER] key.
Execute an ID READ test. The read ID appears on the display.
That’s all for the installation of the RFID module.
Please proceed to the RFID setting.
ID READ
Tag 1/1
Performance 9
00010203 04050607
08090A0B 0C0D0E0F
(Display)
Test Tag
(RFID Tag)
To Next Page
Loading...
