8. Trial run
Prior to the initial operation the maintenance staff of the machine has to
carry out a trial run in order to check the functions of the machine.
Furthermore, this trial run has to be carried out in the event of every new
start-up, i.e.
– after every relocation of the machine
– after every maintenance and repair work
– after every change of sockets
Before starting the machine, always check all components mounted
(knife, counterblades and product feed holder) for tight fit !
The machine may only be operated, if the undercarriage (supple-
mentary equipment) is folded up!
Perform the test run as described on the following page.
Trial run
Page 24 02/2005 123842-GB
To Next Page
Loading...
