18. Service Menu
Warning !
Modifications of the adjusted values may cause wrong functions of
the machine !
Purpose:
TREIF PUMA-CE ’electronic’ has been provided with a service menu, in
which various parameters have to be determined and then adjusted in
dependence of some “hardware” components (eg. light barrier).
The adjustments have to be modified, if:
– a new light barrier has been installed
– another display language is requested.
– the originally programmed cutting program (adjusted in the works of
the manufacturer) is to be activated again.
Warning ! All your inputs and modifications will be lost !
– a new “rear limit switch” has been adjusting
Please proceed as follows:
The following steps describe, how
– the service menu is called.
– the requested program is called
– the modification is carried out.
18.1. Call the service menu
Set the main switch to OFF.
Please open the infeed device and close it again
Press the Service key.
The following display will appear:
language choice <
Slice counter
Release MEMO
Service Menu
Page 82 02/2005 123842-GB
To Next Page
Loading...
