5. Safety
Read this chapter by all means before starting to operate the
machine !
5.1. On-the-job safety instructions
5.1.1 Intended use
– The use of the machine TREIF PUMA-CE ’electronic’ might be dange-
rous. For this reason the plant may only be operated by trained staff
applying it according to the intended use.
Intended use shall also include the observation of these operating
instructions and the adherence to the maintenance instructions.
– The machine TREIF PUMA-CE ’electronic’ has been designed to exclu-
sively cut foodstuffs, such as meat, sausage, cheese or fish. All other
uses of the machine exceeding the above range, such as cutting wood,
is prohibited.
5.1.2 Organisational measures
– The function of the safety equipment has to be checked every day before
starting the machine.
– Observe general legal and other binding regulations for the prevention
of accidents and for the protection of the environment in addition to these
operating instructions.
– The buyer/operator has to issue operating instructions in which the
competence during initial operation, handling, and maintenance is de-
fined.
– The machine must not stay unattended as long as it is in operation.
– The operator also has to take care that no unauthorized persons work
on the machine.
– At least once a jear, all safety-related equipment of the machine has to
be checked for perfect function by trained specialist staff.
– Occasionally, at least, the buyer/operator has to check the safety and
accident-conscious performance of his staff in compliance with these
operating instructions.
– In the event of sale or lease of the machine
- hand over the operating instructions.
- point out the safety instructions.
- inform TREIF Company of the sale in writing.
Safety
Page 14 02/2005 123842-GB
To Next Page
Loading...
