12.6. The single-cut function
The single-cut function has mainly two purposes:
– cutting the product individually with different cutting thicknesses
– interrupting a cutting process to cut, for example, a roast piece out
of a cutlet section.
Cutting a product piece individually:
Open the infeed cover
Insert cutting material and attach to the cutting material retainer.
Close the infeed cover
Move the product to the desired cutting position by pressing the button
’Product holder forwards’ and ’Product holder return’.
Press button ’SINGLE CUT’.
One cutting process is performed.
The product can now be cut individually using the buttons ’Product holder
forwards’ and ’SINGLE CUT’.
Interrupting cutting process to cut a piece out of a product section:
Interrupt cutting process at the desired position by means of the “STOP”
button.
Move the product to the next cutting position using the button ’Product
holder forwards’. (If you have moved the product too far forwards you
can move it backwards by pressing the button ’Product holder return’).
Press button ’SINGLE CUT’.
One cutting process is performed.
Press “START” button to complete cutting of the remaining piece accor-
ding to the program.
Cutting products
Page 56 02/2005 123842-GB
To Next Page
Loading...
