12.8. BRAKE RELEASE" push-button
The key "loosen brake" is for fault clearance, if for instance the knife jams
in the knife slot as a result of bone splinters, and for twisting the knife into
a freely accessible position while exchanging the knife.
If the knife jams in the shaft:
Open the knife box door.
Press the "RELEASE BRAKE" push-butto
The following indication will appear on the display:
Brake of knife
- release -
The brake of the knife motor is released, and the knife can be turned
freely.
Use the ring spanner supplied along with the machine to turn the
knife!
WARNING: Danger of injury on the standing knife!
Eliminate cause of fault.
Press the "RELEASE BRAKE" push-button again:
The ’Brake of knife release’ function is reset.
Close the knife box door, and continue with the cutting operation.
Cutting products
Page 58 02/2005 123842-GB
To Next Page
Loading...
