15.4. Adjustment of the counterblade
ATTENTION:
the counterblade is fragile. Do not drop it !
If a new counterblade is mounted for the first time, the gap to the
non-cutting knife edge has to be set anew.
Please proceed as follows: (knife has to be mounted previously)
Set the main switch to “ON”.
Open the knife box door.
Dismount conveyor when fitted.
Press the ’Brake release’ push-button:
The following indication will appear on the display:
Brake of knife
- release -
The brake of the knife motor is released, and the knife can be turned
freely.
Never touch the knife edge! Always wear the personal protecti-
ve gear specified in chapter "Safety" when handling knives!
Maintenance
02/2005 123842-GB Page 73
To Next Page
Loading...
