The front and rear panel LEDs provide status information for the health of the Sensor and the activity on its ports. The following
table describes the NS-series LEDs.
Front panel LEDs
LED Status Description
Status Green
Amber
Sensor is operating in good
health.
Sensor is booting up. It also
indicates system bad health if the
LED is on for longer duration.
Fan Green
Amber
All ve fans are operating.
One or more fans are not
working.
Temp Green
Amber
Inlet air temperature measured
inside the chassis is normal.
(Chassis temperature OK)
Inlet air temperature measured
inside the chassis is too high.
(Chassis temperature too hot)
Gigabit Ports Speed Green
Amber
O
The port speed is 10000 Mbps.
The port speed is 1000 Mbps.
The port speed is 100 Mbps.
Gigabit Ports Link Green
O
The link is up.
The link is down.
RJ45 FailOpen/Bypass Green
O
The port pair is in Inline Fail-
Open/Inline Fail-Close/SPAN/Tap
Mode.
The Port Pair is in the Bypass
Mode.
| NS9500 Sensors1
Trellix Intrusion Prevention System NS-series Sensor Product Guide
19
To Next Page