Trellix NS Series - Sensor Technical Specifications

Problem Possible Cause Solution
The critical fault, Switch absent
appears in the Manager System
faults page.
The fail-open kit is disconnected. Check the fail-open kit and make
sure it is properly connected to
the Sensor.
For more information on troubleshooting steps and faults generated in the Manager, see the Troubleshooting section in Trellix
Intrusion Prevention System Product Guide.
:
Sensor technical specications
The following table lists the specications of an NS5x00 Sensor:
Sensor Specics NS5200 NS5100
Dimensions 1RU Rack Mountable 17.25” (W) x
1.75” (H) x 24.625” (D)
1RU Rack Mountable 17.25” (W) x
1.75” (H) x 24.625” (D)
Weight 22 lbs. 22 lbs.
Storage Solid State 80 GB Solid State 80 GB
System Heat Dissipation
Maximum BTU 767 767
Typical BTU 512 512
Maximum Power Consumption 225W 225W
Redundant Power Supply Included Included
Power 100-240 VAC (50/60Hz)
Trellix Intrusion Prevention System NS-series Sensor Product Guide
| NS5x00 Sensors6
262