Trellix NS Series - About Fiber-Optic Ports; Contents of the Box

•
•
•
•
•
•
•
•
•
•
About ber-optic ports
The Sensor uses ber-optic connectors for its Monitoring ports. The connector and compatible cable types are below:
Connector
Cable
QSFP28
MPO/MTP and LC-duplex
QSFP+ LC-duplex and MPO/MTP
SFP/SFP+ LC-duplex
Note the following:
Fiber-optic ports (for example, SFP/SFP+/QSFP+/ QSFP28, FDDI, OC-3, OC-12, OC-48, ATM, GBIC, and 100BaseFX) are
considered Class 1 laser or Class 1 LED ports.
These products have been tested and found to comply with Class 1 limits of IEC 60825-1, IEC 60825-2, EN 60825-1, EN
60825-2, and 21CFR1040.
To avoid exposure to radiation, do not stare into the aperture of a ber-optic port. Invisible radiation could be
emitted from the aperture of the port when no ber cable is connected.
Only FDA registered, EN 60825-1 and IEC 60825-1 certied Class 1 SFP/SFP+/QSFP+/QSFP28 laser transceivers are
acceptable for use with the Sensor.
:
Contents of the box
The following accessories are shipped in the NS-series Sensor crate:
Sensor
Power supply (x2)
Power cords (Trellix provides a standard and international power cables)
Set of rack mounting rails
Printed Quick Start Guide
Serial Console Cable (DB9-DB9)
QSFP28 Direct Attach Copper (DAC) cable
Trellix Intrusion Prevention System NS-series Sensor Product Guide
| NS9500 Sensors1
22
Caution