Trellix NS Series - Unassign a License from a Sensor

In case you are replacing an existing license with a license of varied capacity, you must reboot the device for the new
capacity to take eect. If you are replacing an existing license with a same capacity license, reboot is not required.
:
Unassign a license from a Sensor
To unassign the license, perform the following steps:
1. Go to Manager → <Admin Domain Name> → Setup → Licenses.
2. Click the System tab.
3. Select the license you wish to unassign.
4. Click Unassign.
5. Click Ok.
| NS9500 Sensors1
Trellix Intrusion Prevention System NS-series Sensor Product Guide
55
Note