Trellix NS Series - Add the Sensor to the Manager

MariaDB is included with the Manager and is installed (embedded) automatically on your target Windows or Linux server
during this process.
Steps:
1. Prepare the system according to the requirements outlined in Trellix Intrusion Prevention System Installation Guide.
2. Close all open applications.
3. Go to Trellix Download Server (https://www.trellix.com/en-us/downloads/my-products.html).
4. Log on using your Grant Number and registered Email Address.
The Find Products page opens.
5. In the Category lter, select Network Security.
6. Click on the Manager version required.
The Available Downloads page opens.
7. In the Type lter, select Installation.
The Manager installation les available for download are listed.
8. Click on the required Manager installation le and the download starts.
9. Refer to Trellix Intrusion Prevention System Installation Guide for detailed procedure to install the Manager application.
:
Add the Sensor to the Manager
Steps:
1. Log on to the Manager using the default user name (admin) and password (admin123).
2. Go to Devices → <Admin Domain Name> → Global → Device Manager.
The Device Manager page is displayed.
3. Select the Sensors tab and then click .
You do not require a license le to enable IPS on NS-series Sensors.
The Add Devices - Step 1 of 2 panel is displayed.
Trellix Intrusion Prevention System NS-series Sensor Product Guide
| NS9500 Sensors1
74
Note
Note