Trellix NS Series - Before You Install

Rear panel LEDs
LED Status Description
Pwr A (Power A) Solid Green
Blinking Green
Solid Amber
Power Supply A is functioning.
Power Supply A is stand-by. It
also indicates load sharing.
Power Supply A is not functioning
or the unit has no power feed.
Pwr B (Power B) Solid Green
Blinking Green
Solid Amber
Power Supply B is functioning.
Power Supply B is stand-by. It
also indicates load sharing.
Power Supply B is not functioning
or the unit has no power feed.
Management Port Speed Green
Amber
O
The port speed is 10000 Mbps.
The port speed is 1000 Mbps.
The port speed is 100 Mbps.
Management Port Link Green
O
The link is up.
The link is down.
Response Port Speed Green
Amber
O
The port speed is 10000 Mbps.
The port speed is 1000 Mbps.
The port speed is 100 Mbps.
Response Port Link Green
O
The link is up.
The link is down.
:
Before you install
This chapter describes the best practices for deployment of Sensors in your network. Topics include the safety considerations for
handling the Sensor, usage restrictions that apply to the Sensor model, and the contents that are shipped along with the Sensor.
:
| NS9x00 Sensors2
Trellix Intrusion Prevention System NS-series Sensor Product Guide
93