Front panel LEDs
LED Status Description
Status Green
Amber
Sensor is operating in good
health.
Sensor is booting up. It also
indicates system bad health.
Fan Green
Amber
All three fans are operating.
One or more fans are not
working.
Temp Green
Amber
Inlet air temperature measured
inside the chassis is normal.
(Chassis temperature OK)
Inlet air temperature measured
inside the chassis is too high.
(Chassis temperature too hot)
Gigabit Ports Act Blinking Amber
O
Data is received or transmitted.
No data is being transferred.
Gigabit Ports Link Green
O
The link is up.
The link is down.
RJ45 FailOpen/Bypass Green
O
The port pair is in Inline Fail-
Open/Inline Fail-Close/SPAN/Tap
Mode.
The Port Pair is in the Bypass
Mode.
Trellix Intrusion Prevention System NS-series Sensor Product Guide
| NS9x00 Sensors2
92
To Next Page