Trellix NS Series - Page 199

•
•
•
•
•
The NS7100/NS7200/NS7300 Sensor model
Sensor front panel
1. Console port (1)
2. RJ-11 port (1) for fail-open control of two built-in SFP+ ports in slot G0. The RJ-11 port supports 1 Gbps (SFP) copper or ber
and 10 Gbps (SFP+) (SR and LR)
3. SFP+ 1/10 Gigabit Ethernet ports (2)
The RJ-11 port controls only this SFP+ 1/10 port pair in passive fail-open mode.
4. Two slots for I/O modules (Any combination of the interface modules can be used)
SFP/SFP+ 1/10 Gigabit Ethernet Monitoring ports (8)
RJ-45 10/100/1000 Mbps with internal fail-open Ethernet Monitoring ports (6)
10/1 GigE SM 8.5 micron with internal fail-open Monitoring ports (4)
10/1 GigE MM 50 micron with internal fail-open Monitoring ports (4)
10/1 GigE MM 62.5 micron with internal fail-open Monitoring ports (4)
5. RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (8)
The supported transceiver modules are SFP+ (MM and SM), SFP Fiber (MM and SM) and SFP Copper.
Sensor rear panel
| NS7x00 Sensors5
Trellix Intrusion Prevention System NS-series Sensor Product Guide
199
Important