•
In this scenario, Node 2 in the stack becomes unresponsive. The remaining Sensors will continue to process trac at a reduced
throughput of 75 Gbps. Monitoring ports connected to the failed sensor will also experience failure. Trellix recommends you to
use an Active Fail Open kit in such a scenario.
Example 2: Multiple node failure
In this scenario, nodes 2 and 4 in the stack becomes unresponsive. The remaining Sensors (node 1 and 3) will function as given
below:
If node 1 and node 3 are connected to the server, both nodes will continue to process trac at 25 Gbps throughput as
standalone Sensors.
| NS9500 Sensors1
Trellix Intrusion Prevention System NS-series Sensor Product Guide
71
To Next Page