turck TBPN-L1-FDIO1-2IOL - 2 Properties of the Universal Standard I;O Channels (DXP Channels); General

5
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Standard DXP-Kanäle
2 Properties of the universal standard I/O channels (DXP channels)
2.1 General
The TBPN-L1-FDIO1-2IOL provides two DXP channels, which can be configured individually,
depending on the specific application requirements.
Up to four 3-wire PNP sensors or four
PNP DC actuators with a maximum output current of 0.5 A per
output can be connected.
C4
C5
C6
C7
C0
C1
C2
C3
X2X1
P2P1
FE
F-
Address
Abb. 1: Device structure
Meaning
Meaning Power IN
X2 Power OUT
C0 FDI0/1, safety-related input
C1 FDI2/3, safety-related input
C2 FDX4/5, safety-related in-/output
C3 FDX6/7, safety-related in-/output
C4 DXP8/9, standard in-/outputs 
(safe shutdown via FSO 0 po
ssible)
C5 DXP10/11, standard in-/outputs 
(safe shutdown via FSO 0 po
ssible)
C6 IOL, IO-Link port1
C7 IOL, IO-Link port 2 (safe shutdown via FSO 1 possible)
F-Address Rotary coding switch for address setti
ng for PROFIsafe (F-address set-
ting)
P1 Ethernet 1
P2 Ethernet 2
FE Functional earth