Product description
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
18
3.5 Address switches
x100: sets the 100-position of the F-address
x10:sets the 10-position of the F-address
x 1:sets the 1-position of the F-address
Fig. 6: Address switches
Switch
position
Meaning Chapters with further information
0 Delivery state, no valid F-address F-address assignment (page 37)
0 - 899 F-address
hSet the address switches to the needed F-address and
execute a power reset at the device.
900 F_Reset
Sets the device and the plugged memory chip to fac-
tory settings, the content of the memory stick is
deleted.
(F-address, parameters, PROFINET name etc.).
hSet the address switches to 900 and execute a power
rest at the device.
¬Device and memory stick are reset for factory set-
tings.
Reset device to factory settings
(page 68)
901 Erase Memory
Deletes the content of the memory chip.
hSet the address switches to 901 and execute a power
rest at the device.
¬The content of the memory chip is deleted.
– Configuring with Turck Safety
Configurator (page 41)
– Restarting after device
exchange/modification (page
81)
BUS
ERR
PROFINETETH1 ETH2
F- Ad
d
r
es
s
0
9
87
6
5
4
32
1
0
9
8
7
6
5
4
32
1
0
9
8
7
6
5
4
3
2
1
x
1
00
x
1
0
x1
Memory
To Next Page
Loading...
