Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
34
4.4 Parameter "data storage mode" = overwrite
The data set in the IO-Link master is always the reference data set.
The synchronization of the parameter sets is unidirectional towards to the device.
The status of the DS_UPLOAD_FLAG is ignored.
1
IO-Link-Master
IO-Link-Device
Para. IOLD =
parameter data of the IO-Link device
Fig. 7: "Data storage mode" = overwrite
4.5 Parameter "data storage mode" = deactivated, clear
The data set in the IO-Link master is deleted.
The synchronization of parameter sets is deactivated.
IO-Link-Master
IO-Link-Device
Para. IOLD =
parameter data of the IO-Link device
Fig. 8: "Data storage mode" = deactivated, clear
To Next Page
Loading...
