Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
46
7.7 Set up a standard configuration
The register tab "Local I/O" in "Monitor settings" show the standard configuration for the local
device in- and outputs.
Fig. 24: Standard configuration of the local I/O
h Close the dialog box "Monitor settings" by pressing "OK".
¬ The standard configuration is created.
To Next Page
Loading...
