turck TBPN-L1-FDIO1-2IOL - Deleting the Memory Chip

29
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Safe I/O channels
3.10.4 Deleting the memory chip
The content of the memory chip can either be deleted by using the rotary coding switches or via the
Turck Safety Configurator.
Deleting the configuration via rotary switch setting (901)
h Plug the memory chip into device.
h Set the rotary coding switches to 90
1 (Erase Memory).
h Execute a power cycle at the device.
¬ The content on the memory chip is deleted.
¬ The procedure completed as soon as the ERR LED stops blinking.
Deleting the configuration via Turck Safety Configurator
h Select the function "monitor settings o delete configuration" in the Turck Safety Configurator.
Fig. 10: Deleting the configuration via Turck Safety Configurator
¬ The configuration on the memory chip is deleted.
¬ The procedure completed as soon as the ERR LED stops blinking.