turck TBPN-L1-FDIO1-2IOL - Setting the F_Parameters

Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
64
7.13.2 Setting the F_parameters
The device's F_parameters are set for slot 2 "PROFISAFE-Modul_1":
F_parameters Meaning
F_Dest_Add F-address of the TBPN-L1-FDIO1-2IOL
F_iPar_CRC CRC from the plaintext log of the Turck Safety Configurator
Fig. 44: F_parameters
6 Diagnostics Optional mapping of the diagnostics (IO-Link and DXP-
diagnostics) into the master's process image.
7 IO-Link Events Optional mapping of the diagnostics (IO-Link and DXP-
diagnostic
s) into the master's process image.
8 Module status Optional mapping of the diagnostics (IO-Link and DXP-
diagnostic
s) into the master's process image.
NOTE
The TBPN-L1-FDIO1-2IOL offers generic port configuration. 
A specific port configuration with Turck
IO-Link devices via device entries in the GSDML is
not possible.
Slot Module/name Meaning