turck TBPN-L1-FDIO1-2IOL - Standard Configuration; Checking the Configuration

47
V01.00| 2017/04

TBPN-L1-FDIO1-2IOL- Safe I/O channels
7.7.1 Standard configuration
Outputs:
For each device output, which
means, for the two internal safety outputs FSO0 and FSO1 as well as
for the two SIL3-outputs FDX4/5 and FDX6/7 one release circuit (OSSD 1 - OSSD 4) is created. The
outputs are automatically assigned to the first four output bits of the F-CPU.
Inputs:
Additionally, one release circuit (63. OSSD and 64. OSSD) is created for each of the two SIL3-inputs
(FDI0/1 a
n FDI2/3). The inputs are also automatically assigned to the first two input bits of the F-CPU.
Fig. 25: Release circuits (OSSDs) of the standard configuration
7.8 Checking the configuration
The Turck Safety Configurator checks the created configuration for logical errors, which meas, the
logical wiring of the single components in the release circuits is checked. The configuration check
does not consider double allocation etc.
¬ Start the check using the "Check configur
ation" -button.