Configuring with Turck Safety Configurator
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
50
7.10.1 Loading the diagnostics configuration
If the diagnostics are activated, the TSC shows the state of the safety I/Os.
Fig. 30: Released configuration, diagnostics configuration loaded
7.11 Customize the configuration
The standard configuration in the Turck Safety Configurator can be customized in order to meet the
requirements of different applications.
7.11.1 Customizing a standard application (preliminary considerations):
1 What is needed?
Definition of amount and type of the required in- and outputs
Which components are used for the safety function:
–
electromechanical components,
– electric components,
– dual channel switching,
– antivalent switching,
– components with semiconductor OSSD output.
2 Where will the components be placed?
To Next Page
Loading...
