Mounting and connecting
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
36
4.3.4 Assure protection class (IP67/IP69K)
Protection of 7/8'' connectors (power supply)
The 7/8'' dust caps delivered with the device cannot guarantee IP67/IP69K.
Unused 7/8'' connectors have to be sealed with protection caps which guarantee the protection
class.
Suitable protection caps can be found on www.turck.de under "Products o Fieldbus technology
oAccessories".
Protection of M12-connectors (Ethernet and sensors/actuators)
Protection caps for the M12 connectors are part of the device's scope of delivery but can also be
ordered separately: www.turck.de under "Products o Fieldbus technology oAccessories".
Unused M12 connectors have to be sealed with protection caps which guarantee the protection
class.
Admissible tightening torque: 0.5 Nm
WARNING!
Leakages in the housing
Material and personal damage because of malfunction due to penetrating materials
h Always seal unused connectors with respective protection caps. Otherwise the protec-
tion class IP67/IP69K cannot be guaranteed.